0
You have no items in your shopping cart.
MENU
M2 Materials, stratasys filament, stratasys material, stratasys refill cartridge, fortus 900, fortus 900mc, fortus 400mc, fortus 360mc, titan, vantage, fortus 900mc refill cartridge M2 Materials, stratasys filament, stratasys material, stratasys refill cartridge, fortus 900, fortus 900mc, fortus 400mc, fortus 360mc, titan, vantage, fortus 900mc refill cartridge

3D Printing Filament
for Stratasys Machines
Focus on Performance
Our products are specially formulated to be a drop-in refill for original Stratasys® material. We adhere to the highest manufacturing and quality control standards and are confident that both you, and your machine, will be satisfied with our products. If you are unsatisfied with our products we will refund your money. Every spool purchased comes with a complimentary EEPROM chip specific to your machine type.
Find our Materials

Next Gen 3D Printing Material

Stronger yet more flexible. M2 filament is almost double the tensile strength and has slightly higher tensile modulus, when compared to OEM material. These are ideal attributes for 3D printed parts, all while being easy on your wallet.

Market Meta-Analysis

Our market research studies have shown that M2 material is being used in medical devices, innovative circuit boards, robots, and much more.

Approximately

100,000

successful prints with M2 filament
Researchers found

100%

success printing with M2 filament

Save more

Save up to 80% on production costs compared with traditional Stratasys® refills.

Up to

0

lifetime savings
Greater than

0

material savings

Eco-Friendly

Fully recycable spools and packaging help reduce your carbon footprint. We made our packaging lifecycle sustainable because statistically very few spools and cartridges, less than 30%, are actually returned to Stratasys.

Find Your Fit

Our Materials come in three different sizes and are compatible with the following Stratasys printers.

Dimension® Series
Fortus® 250mc
Fortus® 360mc
Fortus® 400mc
Fortus® 900mc (not plus)
Vantage®
Titan®

Next Gen 3D Printing Material

Stronger yet more flexible. M2 filament is almost double the tensile strength and has slightly higher tensile modulus, when compared to OEM material. These are ideal attributes for 3D printed parts, all while being easy on your wallet.

Market Meta-Analysis

Our market research studies have shown that M2 material is being used in medical devices, innovative circuit boards, robots, and much more.

Approximately

100,000

successful prints with M2 filament
Researchers found

100%

success printing with M2 filament

Save more

Save up to 80% on production costs compared with traditional Stratasys® refills.

Up to

0

lifetime savings
Greater than

0

material savings

Eco-Friendly

Fully recycable spools and packaging help reduce your carbon footprint. We made our packaging lifecycle sustainable because statistically very few spools and cartridges, less than 30%, are actually returned to Stratasys.

Find Your Fit

Our Materials come in three different sizes and are compatible with the following Stratasys printers.

Dimension® Series
Fortus® 250mc
Fortus® 360mc
Fortus® 400mc
Fortus® 900mc (not plus)
Vantage®
Titan®

NEWS AND TRENDS

Learn more

ABOUT FDM MATERIALS

Lean more

BULK PRICES

Click here

HOW TO INSTALL

Learn here

News and Trends

Lean more

HOW to Install

Lean more

ABOUT ABS FDM MATERIALS

Learn more

BULK PRICES

Click here

Our products

ABS Filament 92ci - Fortus 900mc | Fortus 400mc | Fortus 360mc

  • M2 Materials delivers the high-quality prints you expect when you refill your Fortus 900mc/Fortus 400mc/ Fortus 360mc with an M2 spool, indistinguishable from Stratasys® M30 material
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • 40% of the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minute-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$350.00 $140.00
Select Options
ABS Filament 56ci - Dimension 1200es | Dimension elite | Fortus 250mc

  • M2 Materials delivers the high-quality prints you expect when you refill your Dimension 1200es/Dimension Elite/Fortus250mc with an M2 spool, indistinguishable from Stratasys® M30/P430/P400 material
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • 40% of the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minute-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
  • RETURN EEPROM CHIP FOR $4 CREDIT
$260.00 $105.00
Select Options
T16 Replacement Tips for Dimension Series Printers - Pack of 2 Tips For Stratasys Printer
T16 Replacement Tips for Dimension Series Printers - Pack of 2 Tips For Stratasys Printer
$260.00 $75.00
HIPS Breakaway Support 56ci - Dimension 1200es | Dimension Elite - SST
  • This HIPS breakaway support can be used to refill your Stratasys Dimension 1200es and Dimension Elite - SST 3D printer.
  • You can use HIPS (High Impact Polystyrene) as a breakaway support material for prints that don't require soluble support
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minutes-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$260.00 $100.00
Select Options
ABS Filament 184ci - Fortus 900 | Fortus 400mc

  • This double size spool refills your Fortus 900mc/400mc/360mc and delivers the high-quality prints you expect, indistinguishable from Stratasys® M30 material
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • 40% of the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minute-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$780.00 $280.00
Select Options
ABS Filament 56ci - Dimension 1200 / 768

  • M2 Materials delivers the high-quality prints you expect when you refill your Dimension 1200 or Dimension 768 with an M2 spool, indistinguishable from Stratasys® M30/P430/P400 material
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • 40% of the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minute-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge

$260.00 $105.00
Select Options
HIPS Breakaway Support 56ci - Dimension 1200 | Dimension 768 - BST

  • This HIPS breakaway support can be used to refill a Stratasys Dimension 1200 BST and a Dimension 768 BST 3D printer
  • You can use HIPS (High Impact Polystyrene) as a breakaway support material for prints that don't require soluble support
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minutes-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge

$260.00 $100.00
Select Options
ABS Filament 92ci - Titan | Vantage

  • M2 Materials delivers the high-quality prints you expect when you refill your Titan/Vantage with an M2 spool, indistinguishable from Stratasys® M30/P430/P400 material
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • 40% the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minute-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$350.00 $140.00
Select Options
HIPS Breakaway Suport 92ci - Fortus 900 | Fortus 400 | Fortus 360mc
  • HIPS breakaway support can be used to refill and replenish the support material in your Fortus 900mc, Fortus 400mc, and Fortus 360mc 3D printers
  • You can use HIPS (High Impact Polystyrene) as a breakaway support material for prints that don't require soluble support
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minutes-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$350.00 $140.00
Select Options
HIPS Breakaway Support 56ci - Fortus 250mc
  • This HIPS breakaway support material is compatible with a Fortus 250mc 3D printer
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • Refill at 40% the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minutes-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$260.00 $100.00
Select Options
M2 Hand Sanitizer Wash-Less 80% Alcohol For Hands And Surfaces
$4.99
Green ABS Filament 56ci - Dimension 1200es | Dimension elite | Fortus 250mc
Green ABS Filament 56ci - Dimension 1200es | Dimension elite | Fortus 250mc

  • M2 Materials delivers the high-quality prints you expect when you refill your Dimension 1200es/Dimension Elite/Fortus250mc with an M2 spool, indistinguishable from Stratasys® M30/P430/P400 material
  • Comes with a complimentary EEPROM chip specific to your machine-type
  • 40% of the cost of OEM Stratasys® cartridges
  • No machine calibration necessary, a proven drop-in solution with thousands of flawless prints
  • Easy installation with our 3-minute-to-replacement procedure. Detailed videos and instructions available to assist installing your M2 spool into your OEM Stratasys® cartridge
$260.00 $105.00
Select Options

Any questions?

Contact us

Fill out the form below

* Required Fields
(0) Items
Go to Checkout View and edit cart
Items 0
Subtotal $0.00
To Top